anglevani™ / Bank fishing indicators
TapSense Mechanical Line Clip
Watch the movement of a resting line.
The orange flag gives you a visible reference beside a resting rod. A screw clamp fixes the indicator to the edge of a suitable support, and a curved metal arm carries the flag above it. Choose a position where you can see the flag against the bank or water.
Set the clamp first
The lower threaded knob brings the clamp faces together around the support. Seat the edge fully between them before tightening. Check that the flag and arm can move freely without touching the rod.
Let the line move freely
Bring the resting line lightly to the arm-end guide. Movement in the line can shift the flag. Watch the flag for a moment in the prevailing wind so you know how the setup behaves before interpreting a change.
How to use it
- Choose a steady support close to your rod and tighten the lower knob by hand.
- Adjust the arm position and lightly rest the line at the guide. Keep the line clear of the clamp jaws.
- Watch for changes and check the rod directly. Clear the line from the guide before moving the setup.
Size & fit
- Height shown
- 3.3 in (8.5 cm)
- Base dimensions shown
- 2.0 × 1.1 in (5.2 × 2.8 cm)
- Indicator
- Orange flag on a curved metal arm
Does every movement mean a bite?
Wind, current and changes in line tension can also shift the flag. Use it as a visual cue while attending the rod. Operation is mechanical and requires no batteries.
Care & storage
Wipe the clamp faces clean and rinse grit from the adjuster. Dry the arm and store it where other tackle cannot bend it out of shape.




