anglevani™ / Catch measurement
ScaleSlate Fish Measuring Board
Read length from a fixed starting point.
ScaleSlate gives you a rigid surface with a printed ruler, a raised side and a contrasting orange end stop. Together they provide a repeatable position for a quick length check. Prepare the board and your camera before bringing a fish alongside.
Start at the end stop
Set the board on a level, supported surface and wet it before use. Bring the fish's nose gently to the orange stop. The side edge helps you keep the body aligned while leaving the scale visible along its length.
Read from directly above
Follow the fish along the ruler to the tail, with your eye or camera directly above the mark. An angled view can make the tail appear to meet a different line. Handle the fish gently and return it to the water promptly.
How to use it
- Choose a stable surface near the water and make sure the markings are easy to see.
- Align the nose at the end stop and gently straighten the body.
- Read the relevant tail position and release the fish promptly.
Size & fit
- Board length
- 24 in (61 cm)
- Width × height shown
- 3.5 × 1.5 in (9 × 3.8 cm)
- Construction
- Rigid plastic board with printed scale
Can I use this for a tournament entry?
Check the organizer’s approved boards, required pose and photo rules first. If the tail extends past the printed range, use a longer board for the reading.
Care & storage
Rinse the ruler and stop with fresh water, then wipe with a soft cloth. Keep abrasive pads and solvents away from the printed markings.




