anglevani™ / Kayak organization
RailDock Kayak Bait Caddy
Keep bait and small tools off the cockpit floor.
Choose a place along your kayak track that you can reach from the seat without interrupting a paddle stroke. RailDock brings bait containers and frequently used tools to that spot in an open tray. The low sides give a clear view of what is inside during a bait change.
Give each item a place
The broad well accommodates a small container while the narrow side channels separate slim items. Four openings in the central area let water pass through. Keep tiny loose tackle in a closed container inside the tray.
Position it on your track
Two mounts beneath the tray engage a compatible T-track. Their spacing and the available length of straight rail determine where the tray can sit. Leave enough clearance beneath and beside it to tighten the hardware.
How to use it
- Measure the rail opening and inner channel and compare them with the mount before installation.
- Fit both mounts into the track, position the tray and hand-tighten evenly.
- While stationary, test your paddle stroke and reach with the tray lightly loaded.
Size & fit
- Tray length
- 9.4 in (24 cm)
- Tray width × height
- 5.3 × 1.6 in (13.5 × 4 cm)
- Mounting system
- Two track mounts with hand fasteners
Will it fit any kayak?
RailDock needs a compatible T-track and a clear mounting area. A round tube or bare deck requires a different mounting arrangement. Measure your bait box against the compartments as well as the tray footprint.
Care & storage
Empty the tray after each outing, flush the drain openings and rinse the mounting hardware. Dry the fasteners before storage.




