anglevani™ / Shallow-water kayak positioning
DriftAnchor Compact Kayak Stake
Hold a quiet spot over a soft bottom.
When a light kayak drifts off a near-shore fishing spot in calm, shallow water, this hand-set stake gives you a temporary tie point. Choose a location where you can reach the bottom comfortably and keep the boat level while you work.
Turn the helix into soft ground
The cross handle provides a grip on each side of the shaft. Turning it by hand works the helical foot into penetrable bottom. Gravel, rock and hard-packed ground cannot provide the same engagement.
Keep the tether accessible
The rope connects at the upper end of the stake. Route it clear of your feet, paddle and fishing line. Use a suitable kayak attachment point and keep the connection accessible throughout the stop.
How to use it
- Check the depth, bottom and conditions before setting the stake. Use it only for a brief stop in calm shallows.
- From a stable position, turn the helix into soft ground and gently check that it holds before attaching the kayak.
- Remain with the kayak. Release the tether first when leaving, then turn the stake out and bring it aboard.
Size & fit
- Overall length
- 19.7 in (50 cm)
- Handle span
- 10.2 in (26 cm)
- Construction
- Stainless steel shaft and helical foot with padded T-handle
Is it suitable for strong current or offshore use?
Choose sheltered, shallow water with a soft bottom. Current, wind, wave action and deep water fall outside this compact stake’s intended use. The shaft length alone does not establish a safe working depth.
Care & storage
Rinse mud and salt from the helix and let the rope dry uncoiled. Inspect the tether and attachment ring for wear. Cover the metal foot for transport, especially near an inflatable hull.




