anglevani™ / Surf & bank fishing
ShoreLock Sand Spike Rod Rest
Give your reel a place above the sand.
When you pause to retie a leader or sort your bait, a rod laid on the beach can pick up wet sand around the reel. ShoreLock gives one rod a raised resting point. Choose a patch of compact, penetrable sand above the wash where you can stay within reach of the rod.
A padded place for the blank
The open U-shaped cradle supports the rod from below and leaves the top clear. Set a straight section of the blank between the arms, leaving the line guides and reel free. The dark contact surfaces separate the blank from the metal shaft.
Set the cradle to the bank
The collar below the fork lets you change the angle after planting the spike. Turn the opening toward your fishing position so you can lift the rod in one movement. Check the angle with the rod in place before settling in.
How to use it
- Press the point straight into firm sand by hand until the shaft stands steadily.
- Adjust the fork, tighten the collar and gently test the support.
- Rest one rod in the cradle. Keep the reel clear of the ground and lift the rod out if the sand shifts.
Size & fit
- Overall length
- 16.5 in (42 cm)
- Width marked at shaft
- 0.8 in (2 cm)
- Support
- Single open rod cradle
Will this work on a rocky bank?
The spike needs ground it can penetrate. Choose sand above the wash. Rock, pavement and loose sand being scoured by waves provide poor support.
Care & storage
After fishing, rinse salt and grit from the collar and cradle with fresh water. Dry the spike before strapping it alongside a rod bag, with the point covered.




